There is also silver jewelry with crystals. These are very special pieces. Cleaning them is a challenge as you have to be careful while cleaning to maintain the sparkle and shine of the crystal. Here are some tips for properly cleaning your jewelry. The first thing you should do is wiping with a damp cloth. Wipe the dirt inside the accessory. Remember that sweat, dirt, cream and oil collect on jewelry. Remove the jewelry with a damp cloth. Try cleaning the silver piece first. Special metal cleaning tools can be used. There are also clothes that can be used for this purpose. Note that these products should not be used to clean crystals as they will only distort the shape of the crystal. Remember to clean the crystals separately to keep them in good condition.
Use standard window cleaner and water to clean the crystal.
Use a few drops of window cleaner and mix it with a tablespoon of water. This will be the main cleaning solution. Dip a cotton ball in the solution and use it to clean the crystal. Rinse and place on a clean towel to dry. Wrap the jewelry in paper to protect it from scratches. Make sure to pack valuables in an airtight container to avoid damage. Plastic bags can also be used. Just make sure they don’t end up in the wrong place.
How to clean your carpet properly
A rug is not a simple purchase. That’s why you need to take special care of the carpets in your home. If you are careful not to drop it on the carpet and dry it immediately if you do, you will find that it will last longer than most carpets. Dealers recommend cleaning the carpet at least once a year, depending on the condition and condition of the fibers. Although it looks immaculate, it still needs to be cleaned to remove the dust that has accumulated in its hair. It also leaves no visible stain on the carpet and drains the water often, but the fibers become tough, so the carpet must be cleaned. Even if you are cleaning a small area, you should complete the Rengøringsfirma process and follow some tips to help extend the life of your carpet. The three main cleaning methods are hot water extraction, cold water extraction and dry extraction.
The first method of producing hot water is also called a steam bath.
In this method, a suitable carpet cleaner is mixed with boiling water and the hot water is poured over the entire carpet. It lifts the dirt and grime from the carpet to the hot water. The carpet cleaner then recirculates this waste water, resulting in a much cleaner carpet. Another way to clean carpets is to vacuum with cold water, mix a carpet cleaning solution with cold water, then run this cold water over the carpet and vacuum again. This happens in carpets where the fibers are sensitive to hot water. Dry extraction is another cleaning method where a foam or powder cleaner is applied to the soiled carpet. The carpet cleaner vacuums the carpet and finally the carpet cleaner or vacuum cleaner collects the dirt.
Leave a Reply