People set up Amped WiFi range extenders in their homes to access a lag-free internet connection. But, it is quite disappointing when the Amped extender fails to serve its purpose of providing a high-speed internet connection. If you have also done Amped extender setup and are facing the no internet issue even after being connected, then we’ve got your back. Here, we will provide you with various troubleshooting techniques to get the issue fixed with ease. So, read on.
Fixed: Amped Extender Connected But No Internet
Check the Extender-Router Connection
The primary reason behind the Amped extender connected but no internet issue might be a weak extender-router connection. Therefore, you need to ensure the same. Don’t know how to check the strength of the extender-router connection? Let us tell you.
If you have used a wireless source to connect your devices, then the distance between them matters a lot. It means you can neither place them too close nor too far. Because the WiFi signals will get hampered in both cases. Just in case you are more of a wire person, then check the condition of the Ethernet cable you’ve used to connect your Amped extender and the router. Is it worn out? If the answer turns out to be yes, then it is advised to get it replaced with a new one as soon as possible. In addition, make sure that the Ethernet cable is firmly connected to the ports of your WiFi devices.
Reboot the Extender
How can we forget this? Chances are that your Amped extender is struggling with technical glitches leading you to the issue you are facing. Before these glitches overpower your Amped extender completely, eliminate them by rebooting your WiFi device.
Rebooting an Amped WiFi extender is not rocket science. All you have to do is switch off the power supply to the extender, let it rest for a few minutes, and switch on the power supply again. Once done, try to access setup.ampedwireless.com and see if you get success this time.
Eliminate WiFi Interference
Another reason behind the Amped extender connected but no internet issue might be WiFi interference. FYI, WiFi interference refers to any obstruction in the path of the extender’s WiFi signals. To resolve the issue you are facing, consider removing WiFi interference.
It can be done either by relocating your Amped WiFi extender or removing the factors creating WiFi interference. Therefore, ensure that the location of your Amped range extender does not lie near televisions, treadmills, smart cameras, Bluetooth speakers, microwave ovens, refrigerators, mirrors, etc. Apart from this, make sure that your Amped extender is not placed in a corner or near a thick concrete wall as WiFi signals struggle more at these locations.
Contact Your ISP
Everything from your end is right including the location and connections of your Amped wireless range extender It seems that you are facing the Amped extender connected but no internet issue because your ISP is not doing his job properly.
So, what are you waiting for? Give him a call and ask him whether the issue has arisen from his end. If he agrees to your statement, then ask him to get the problem fixed as soon as possible.
Reset and Reconfigure
If none of the above-mentioned troubleshooting hacks have worked in your so far, then the time has come to go for the factory default reset process. Why? Because there are high chances that you are facing the issue due to an improper setup process. So, restore your extender to the factory default settings.
For this, look for the Reset button and press it carefully. The moment your Amped extender returns to the default mode, set it up again. You can configure your WiFi device either by accessing the Amped wireless extender setup wizard or using the WPS method. The choice is all yours.
The Bottom Line
Facing the Amped extender connected but no internet issue has become common these days. However, if you follow the correct troubleshooting techniques, you can fix it in an instant. Hopefully, the above-discussed tips will help you gain access to a lag-free internet connection again.