In-Depth Guide to Change IP Address of Wireless-N Repeater

Have you ever faced the IP address conflict issue with your Wireless-N WiFi repeater? If you have answered the question in yes, then you have landed on the right post. You can easily get rid of the IP address conflict issue by assigning a new IP address to your WiFi repeater. But, are you acquainted with the process of changing the IP address of your Wireless-N WiFi repeater? No, walk through this post and learn the step-by-step guidelines to change IP address by accessing the Wireless-N WiFi repeater setup wizard.

Steps to Change Wireless-N Repeater IP Address

Step 1- Turn on Your Repeater

First of all, turn on your Wireless-N WiFi repeater. For this, find a wall socket near your home router and plug your WiFi repeater into it. Once done, press the Power button.

Just in case your Wireless-N WiFi repeater doesn’t get powered up, check the wall socket in which you have plugged it. Chances are that it is damaged. So, get it repaired or use another wall socket to ensure a non-fluctuating power supply to your Wireless-N WiFi repeater.

Step 2- Connect Repeater to Router

Now, the next step to change the IP address is to create a connection between your Wireless-N repeater and the host router. You can do it by connecting your devices either using a wired or a wireless source. However, you need to be sure about the strength of the connection. Else, you will face technical issues during the WiFi repeater login  process.

If you have used a wired source, make sure that the network cable you’ve used is free of cuts and is tightly plugged into the repeater’s port. While in the case of a wireless source, check for the proximity of your WiFi devices. If they are too far bring them closer.

Step 3- Pull Up a Web Browser

Once you have established a strong connection between your WiFi devices, pay attention to the PC. Open a web browser like Chrome, Firefox, Internet Explorer, Edge, Safari, etc.

No matter which web browser you choose to change the IP address of your Wireless-N WiFi repeater, just make sure that it is not running on an outdated version. Also, ensure that the browser you have chosen is free of cache, cookies, and browsing history. If not, then delete the unnecessary files right away.

Step 4- Log in to Your Wireless-N WiFi Repeater

Now, go to the address field of the web browser and insert the default Wireless-N WiFi repeater IP address. Press the Enter key to reach the official login page of the repeater.

As soon as you get redirected to the login page, enter the default username and password of your Wireless-N WiFi repeater. Remember that the default Wireless N WiFi repeater login credentials are case-sensitive. So, be careful while entering them. Click the OK button once you are done entering them.

Step 5- Assign a New IP

Once you get logged in to your Wireless-N WiFi repeater, click the Device Settings tab located at the left corner of the screen. You will reach the System Utility window.

Now, head over to the Management IP section and enter the new IP address for your Wireless-N WiFi repeater. Fill in the other details into their respective fields and click the Apply button.

Caution: Make sure that the IP address you’ve assigned to your Wireless-N WiFi repeater is different from that of your host router as well as the previous one of your repeater.

Wrapping Up

And here, we are wrapping up our guide to change the default IP address of the Wireless-N WiFi repeater. Let’s hope that the steps discussed in this post will help you assign a new IP address to your device via the WiFi repeater setup wizard. If this article has helped you in doing that, drop your valuable feedback in the comment section.